XPL2200 CSB 12V Pure Lead VRLA-AGM High-Capacity Battery

Product Features

Battery is of the valve-regulated lead-acid (VRLA) type
Maintenance-free; with AGM (Absorbent Glass Mat) technology, gas recombination efficiency can reach up to 99%
Construction uses pure lead with proprietary elements
Developed for high-rate UPS and float standby power applications
Manufactured in accordance with IEC 60896-21/22:2004; UL1989 recognition (MH14533) has also been obtained

Application Scenarios

UPS long-duration backup — data centers
Long-duration standby power — large computer rooms
Long-duration discharge backup — industrial UPS
Long-duration backup — financial systems
Long-duration standby power — communication hubs
Long-duration UPS — medical centers

Product parameters

Model：XPL2200
Voltage：12 Vdc
Nominal Capacity：2200W @5min-rate
Watts per Cell：563.00 (30-Sec 1.67 VPC @ 25°C)
Watts per Cell：366.17 (5-Min 1.67 VPC @ 25°)
Watts per Cell：201.50 (15-Min 1.67 VPC @ 25°)
Max. Charge Current：18.30 A
Max. Discharge Current：500 A
Short Circuit Current：1344 A
Internal Resistance：5.60 mΩ
Terminal Type：I2 thread lead alloy terminal to accept M6 bolt
Terminal Torque：51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.1±1.0 N·m
Container Material：PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
Weight：16.65 / 36.70 kg / lb.
Length (L)：228.0±2.5 / 8.98±0.10 mm / in
Width (W)：138.4±1.5 / 5.45±0.06 mm / in
Height (H)：206.3±2.5 / 8.12±0.10 mm / in
Design Life：Up to 10 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
Float Charging Voltage：13.5 - 13.8 Vdc/battery
Equalizing Charging Voltage：14.4 - 15.0 Vdc/battery
Operating Temperature：discharge -15°C to 50°C; charge/storage -15°C to 40°C

Product details

The CSB XPL2200 in the XPL series is a 12V top-terminal valve-regulated sealed lead-acid battery that combines pure lead and AGM technology in its construction. For long-duration standby applications requiring high-capacity monobloc units, this series meets the need; data center uninterruptible power supplies are its official application direction. At 25°C, nominal capacity is 2200W @5min-rate. Cell power (W/cell) at 1.67 VPC is: 563.00 W/cell at 30 seconds, 366.17 W/cell at 5 minutes, and 201.50 W/cell at 15 minutes. Electrically, internal resistance is 5.60 mΩ and short-circuit current is 1344 A; maximum discharge current is 500 A, and maximum charge current is 18.30 A. At 25°C, float voltage must be maintained at 13.5 to 13.8 Vdc/battery, and equalization voltage at 14.4 to 15.0 Vdc/battery. Terminals are I2 threaded lead alloy and can accept M6 bolts, with tightening torque of 51.7±10.3 Kgf∙cm, 44.9±9.0 Lbf∙in, or 5.1±1.0 N∙m. Length, width, and height are 228.0±2.5 mm, 138.4±1.5 mm, and 206.3±2.5 mm respectively, with a total weight of 16.65 kg (36.70 lb). PP (UL 94-HB) is used for the case; if flame retardant (94-V0) is required, it can also be supplied on request. Design life is up to 10 years under 25°C float standby service, and the Eurobat (20°C) rating exceeds 12 years, providing ultra-long life. For temperature specifications, 25°C is the nominal value; discharge range is -15°C to 50°C; charge and storage range is -15°C to 40°C. For self-discharge, after 90 days at 25°C, self-discharge is less than 10%; maximum storage is 6 months, or up to 10 months with equalization charging. Fully charge before first use; if storage temperature exceeds 25°C, charge earlier. The valve-regulated sealed lead-acid design plus AGM technology forms the foundation of the XPL2200, with gas recombination efficiency up to 99% and no maintenance required. The pure lead construction and proprietary element design target high-rate UPS and float standby power. Manufacturing follows IEC 60896-21/22:2004, and UL1989 recognition (MH14533) has also been obtained.