Product Features

  • These batteries are of the valve-regulated lead-acid (VRLA) type
  • Maintenance-free, with AGM (Absorbent Glass Mat) technology for gas recombination, efficiency up to 99%
  • Proprietary elements combine with pure lead in their construction
  • Designed for extreme temperature environments and float standby power duties
  • Manufacturing complies with IEC 60896-21/22:2004; UL1989 recognition (MH14533) has also been obtained

Application Scenarios

  • Suitable as backup power for telecom broadband access equipment
  • DC power supply suitable for outdoor communication cabinets
  • Backup power for fiber optic network nodes
  • Backup power scenarios for indoor and outdoor communication base stations
  • This power supply can supply power to broadband integrated service access
  • Backup power supply suitable for cable TV networks

Product parameters

  • Model:XTV121100
  • Voltage:12 Vdc
  • Nominal Capacity:110 Ah @20hr-rate
  • Ah Capacity:102 (8-Hr 1.75 VPC @ 25°C)
  • Ah Capacity:110 (20-Hr 1.75 VPC @ 25°C)
  • Ah Capacity:101 (8-Hr 1.80 VPC @ 25°C)
  • Max. Charge Current:33 A
  • Max. Discharge Current:800 A
  • Short Circuit Current:2648 A
  • Internal Resistance:3.60 mΩ
  • Terminal Type:I2 thread lead alloy terminal to accept M6 bolt
  • Terminal Torque:51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.1±1.0 N·m
  • Container Material:PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
  • Weight:34.20 / 75.38 kg / lb.
  • Length (L):343.0±2.5 / 13.50±0.10 mm / in
  • Width (W):170.0±2.0 / 6.69±0.08 mm / in
  • Height (H):216.9±2.5 / 8.54±0.10 mm / in
  • Design Life:Up to 12 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
  • Float Charging Voltage:13.5 - 13.8 Vdc/battery
  • Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
  • Operating Temperature:discharge/charge -20°C to 50°C; storage -15°C to 40°C

Product details

The XTV121100 belongs to the XTV series in the CSB product line and is a 12V valve regulated sealed lead acid battery. Its separator uses AGM absorbent glass mat, and the gas recombination efficiency can reach 99%; it uses a pure lead construction with proprietary elements. The battery is intended for telecom broadband applications, can be used indoors and outdoors, mainly provides float standby power, and can operate under extreme temperature conditions. In terms of physical form and terminals, the XTV121100 uses I2 threaded lead alloy terminals and can accept M6 bolts; the terminal torque requirements are 51.7±10.3 Kgf∙cm, 44.9±9.0 Lbf∙in, or 5.1±1.0 N∙m. The case is made of PP, complies with UL 94-HB, and a 94-V0 flame-retardant version can also be provided upon request. Dimensions are length 343.0±2.5mm, width 170.0±2.0mm, and height 216.9±2.5mm; weight is approximately 34.20kg. Charging parameters and temperature limits are as follows: at 25°C, the float charging voltage range is 13.5 to 13.8Vdc, and the equalization charging voltage range is 14.4 to 15.0Vdc. The nominal operating temperature is 25°C; discharge and charging are both carried out within -20°C to 50°C, while storage permits -15°C to 40°C. For self-discharge, after 90 days at 25°C, the remaining capacity is still greater than 90%; storage time is up to 6 months, and a full charge is required before putting the battery into service. If the storage temperature is higher than 25°C, charging should be performed earlier. Capacity and current data are as follows: at 25°C and 1.75VPC, the 20-hour rate nominal capacity is 110Ah and the 8-hour rate capacity is 102Ah; at 25°C and 1.80VPC, the 8-hour rate capacity is 101Ah. The battery's maximum charging current is 33A, maximum discharging current is 800A, short-circuit current is 2648A, and internal resistance is 3.60mΩ. These values reflect its basic electrical capability for standby and float charging in telecom DC power systems. For life and certifications, the design life under 25°C float standby service can reach 12 years; under the Eurobat 20°C standard it is greater than 12 years, with a rating of Very Long Life. The product is manufactured in compliance with IEC 60896-21/22:2004 and is recognized by UL1989 (MH14533). As a maintenance-free battery, it is suitable for telecom communication and other scenarios requiring long-term float standby. During installation, tighten according to the terminal torque requirements while maintaining ventilation and a suitable temperature.
link
Go to purchase
Telephone
13775032303
email
powercube@foxmail.com
wechat
wechat
Loading...