CSB XPL7000FT Front Terminal 12V Valve-Regulated Sealed Lead-Acid Battery
The CSB XPL7000FT in the XPL-FT series is primarily intended for high-rate backup power applications such as data center uninterruptible power supplies. This 12V front terminal valve-regulated sealed lead-acid battery combines AGM and pure lead technology, with a nominal capacity of 7000W @5min-rate.
Taobao store
WeChat procurement
Product Features
- This battery belongs to the valve-regulated lead-acid (VRLA) category
- AGM (Absorbent Glass Mat) technology is used, with gas recombination efficiency up to 99% and maintenance-free characteristics
- The construction consists of pure lead and contains proprietary elements
- Designed specifically for float-charge standby power and high-rate UPS applications
- The manufacturing process follows IEC 60896-21/22:2004 and has obtained UL1989 approval (MH14533)
Application Scenarios
- Front-terminal long-duration backup for data centers
- UPS backup battery, supports high-rate discharge
- Front-access wiring backup power, suitable for large equipment rooms
- Long-duration backup power for communication equipment rooms
- High-rate backup for industrial control scenarios
- Provides uninterruptible power for network equipment
Product parameters
- Model：XPL7000FT
- Voltage：12 Vdc
- Nominal Capacity：7000W @5min-rate
- Watts per Cell：1766.00 (30-Sec 1.67 VPC @ 25°C)
- Watts per Cell：1144.17 (5-Min 1.67 VPC @ 25°)
- Watts per Cell：642.50 (15-Min 1.67 VPC @ 25°)
- Max. Charge Current：58.30 A
- Max. Discharge Current：1550 A
- Short Circuit Current：4132 A
- Internal Resistance：2.01 mΩ
- Terminal Type：I2 thread lead alloy terminal to accept M6 bolt
- Terminal Torque：51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.1±1.0 N·m
- Container Material：PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
- Weight：49.70 / 109.57 kg / lb.
- Length (L)：558.0±2.5 / 21.97±0.10 mm / in
- Width (W)：126.0±1.5 / 4.96±0.06 mm / in
- Height (H)：255.0±2.5 / 10.04±0.10 mm / in
- Design Life：Up to 10 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
- Float Charging Voltage：13.5 - 13.8 Vdc/battery
- Equalizing Charging Voltage：14.4 - 15.0 Vdc/battery
- Operating Temperature：discharge -15°C to 50°C; charge/storage -15°C to 40°C
Product details
In the official application segment of data center uninterruptible power supply, the CSB XPL7000FT is a 12V front terminal valve-regulated sealed lead-acid battery in the XPL-FT series. It is made with AGM (Absorbent Glass Mat) technology, with gas recombination efficiency up to 99%, and uses a pure lead construction and proprietary elemental formulation; the series is primarily intended for high-rate UPS and data center backup power. As a maintenance-free valve-regulated sealed lead-acid battery, this model is suitable for data center UPS and other applications requiring high-rate discharge and float-charge standby.
In terms of service life and certifications, under standby float service at 25°C, the XPL7000FT has a design life of up to 10 years; according to the Eurobat (20°C) standard, it is greater than 12 years and classified as Very Long Life. It is manufactured in accordance with IEC 60896-21/22:2004 and has UL1989 recognition (MH14533).
For electrical and environmental conditions, at 25°C the float charge voltage is 13.5 to 13.8 Vdc/battery, and the equalization charge voltage is 14.4 to 15.0 Vdc/battery. Nominal operating temperature is 25°C (77°F); discharge temperature is -15°C to 50°C (5°F to 122°F), and charge and storage temperature is -15°C to 40°C (5°F to 104°F). Self-discharge after 90 days at 25°C is less than 10%; it can be stored for up to 6 months, and with equalization charging for up to 10 months. It must be fully charged before use; if storage temperature is above 25°C, charge earlier.
For power and current parameters, under test conditions of 9.60V per battery at 25°C, the nominal capacity reaches 7000W @5min-rate. Its per-cell power performance is: 1766.00 W/cell at 30 seconds, 1.67 VPC, 25°C; 1144.17 W/cell at 5 minutes, 1.67 VPC, 25°C; 642.50 W/cell at 15 minutes, 1.67 VPC, 25°C. Internal resistance is 2.01 mΩ; short-circuit current is 4132 A; maximum discharge current is 1550 A; maximum charge current is 58.30 A.
For construction and installation, I2 threaded lead alloy terminals accept M6 bolts, with terminal torque 51.7±10.3 Kgf∙cm, 44.9±9.0 Lbf∙in, or 5.1±1.0 N∙m. The case material is PP (UL 94-HB); a flame-retardant (94-V0) version is available upon request. External dimensions are length 558.0±2.5 mm, width 126.0±1.5 mm, height 255.0±2.5 mm; weight is 49.70 kg (109.57 lb).
