UPS12460 CSB Valve Regulated Sealed Lead Acid Battery 12V 460W
For float standby power scenarios in data center uninterruptible power supplies, the UPS12460 is classified by CSB under the UPS series and is a 12V valve regulated sealed lead acid battery; its 5-minute rate is 460W, and it uses an internal AGM and pure lead design, requiring no maintenance during use.
Taobao store
WeChat procurement
Product Features
- VRLA (valve-regulated lead-acid) battery
- Maintenance-free design combined with AGM (absorbent glass mat) technology, with gas recombination efficiency up to 99%
- Structure uses pure lead and incorporates proprietary elements
- Specifically designed for high-rate UPS and float standby power applications
- Manufacturing process complies with IEC 61056-1/2:2012 and is UL1989 recognized (MH14533)
Application Scenarios
- Used in data centers with uninterruptible power supplies paired with backup batteries
- Server rooms are powered by UPS
- In industrial applications, uninterruptible power supplies provide high-power backup
- Medical equipment uses UPS for emergency power
- Financial systems use uninterruptible power supplies as backup power
- Telecommunication rooms use UPS for backup power
Product parameters
- Model：UPS12460
- Voltage：12 Vdc
- Nominal Capacity：460W @5min-rate
- Watts per Cell：74.00 (5-Min 1.67 VPC @ 25°)
- Watts per Cell：36.83 (15-Min 1.67 VPC @ 25°)
- Max. Charge Current：3.80 A
- Max. Discharge Current：130 A
- Short Circuit Current：450 A
- Internal Resistance：16.60 mΩ
- Terminal Type：F2 terminal (Faston Tab 250)
- Container Material：ABS (UL 94-HB) standard, flame-retardant (94-V0) available upon request
- Weight：2.50 / 5.51 kg / lb.
- Length (L)：150.9±2.0 / 5.94±0.08 mm / in
- Width (W)：64.8±1.0 / 2.55±0.04 mm / in
- Height (H)：98.6±1.0 / 3.88±0.04 mm / in
- Design Life：Up to 5 years in standby service at 25°C; Eurobat (20°C): 3-5 years, Standard Commercial
- Float Charging Voltage：13.5 - 13.8 Vdc/battery
- Equalizing Charging Voltage：14.4 - 15.0 Vdc/battery
- Operating Temperature：discharge -15°C to 50°C; charge/storage -15°C to 40°C
Product details
In CSB's product classification, the UPS12460 is assigned to the UPS series. This product type covers 6V and 12V top-terminal VRLA-AGM batteries, and the official application direction is data center uninterruptible power supplies. This series is defined as a high-power pure lead UPS battery product line for uninterruptible power supply applications.
In terms of design and construction, this battery uses a valve regulated sealed lead acid design and absorbed glass mat technology, with gas recombination efficiency up to 99%, while incorporating pure lead construction and proprietary elements. The case is ABS (UL 94-HB); a flame-retardant version (94-V0) is available on request. Terminal specification is F2 terminal - Faston Tab 250. Dimensions are: length 150.9±2.0 mm, width 64.8±1.0 mm, height 98.6±1.0 mm, and overall weight 2.50 kg.
For electrical specifications, the UPS12460 can withstand a maximum charge current of 3.80 A, a maximum discharge current of 130 A, and a short-circuit current of 450 A, with measured internal resistance of 16.60 mΩ. At 25°C, the float charge voltage range is 13.5 to 13.8 Vdc/battery, and the equalization voltage range is 14.4 to 15.0 Vdc/battery. Self-discharge performance is as follows: after 90 days of storage at 25°C, capacity loss is less than 10%; storage for up to 6 months is possible, but the battery must be fully charged before use; if storage temperature exceeds 25°C, charging must be performed sooner.
For the UPS12460 specifically, rated voltage is 12 Vdc; at 9.60V per PCS @ 25°C, nominal capacity is 460W at the 5-minute rate; in terms of cell power, at 5 minutes 1.67 VPC @ 25°C it is 74.00 W/cell, and at 15 minutes 1.67 VPC @ 25°C it is 36.83 W/cell.
For temperature adaptability, nominal operating temperature is 25°C; discharge is allowed from -15°C to 50°C, and charging and storage are allowed from -15°C to 40°C. For life, in 25°C float standby service, design life is up to 5 years; calculated according to Eurobat (20°C) standard for commercial applications, it is 3 to 5 years. Manufacturing is based on IEC 61056-1/2:2012 and is recognized to UL1989 (MH14533).
Based on these features, the UPS12460 can be used in float standby applications for data center uninterruptible power supplies; its design focuses on high-rate discharge and maintenance-free operation, and it can meet the requirements of float-service standby power applications for battery consistency, sealing, and gas recombination capability.
