CSB TPL121000FR Telecom Backup Power Battery: Front Terminal, 12V 100Ah, Long Life

Product Features

VRLA valve-regulated lead-acid battery
With AGM (Absorbent Glass Mat) technology, gas recombination efficiency up to 99%, maintenance-free
Based on a pure lead structure with proprietary elements
Specifically designed for float standby power applications
UL1989 recognized (MH14533), manufactured in accordance with IEC 60896-21/22:2004

Application Scenarios

Equipment room backup power for broadband access networks
Central office standby power for fiber-to-the-home
Outdoor cabinet DC power for telecommunications
Base station extended backup for communications
Network node standby power for cable TV
Access point power for integrated broadband services

Product parameters

Model：TPL121000FR
Voltage：12 Vdc
Nominal Capacity：100 Ah @10hr-rate
Ah Capacity：100 (8-Hr 1.75 VPC @ 25°C)
Ah Capacity：107 (20-Hr 1.75 VPC @ 25°C)
Ah Capacity：96.8 (8-Hr 1.80 VPC @ 25°C)
Max. Charge Current：30 A
Max. Discharge Current：800 A
Short Circuit Current：2216 A
Internal Resistance：3.70 mΩ
Terminal Type：I2 thread lead alloy terminal to accept M6 bolt
Terminal Torque：51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.1±1.0 N·m
Container Material：Flame-retardant ABS (UL 94-V0)
Weight：38.30 / 84.41 kg / lb.
Length (L)：511.6±2.5 / 20.16±0.10 mm / in
Width (W)：110.0±1.5 / 4.44±0.06 mm / in
Height (H)：255.5±2.5 / 10.11±0.10 mm / in
Design Life：Up to 12 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
Float Charging Voltage：13.5 - 13.8 Vdc/battery
Equalizing Charging Voltage：14.4 - 15.0 Vdc/battery
Operating Temperature：discharge -15°C to 50°C; charge/storage -15°C to 40°C

Product details

The CSB TPL121000FR is classified in the TPL series and is a front-terminal valve-regulated sealed lead-acid battery. It is designed for float standby power, with its official use specified as telecommunications; within the series, this product serves the multi-hour runtime requirements of broadband applications. Technically, the battery uses an absorbed glass mat (AGM) separator, combining pure lead construction with a proprietary element formula, and can achieve gas recombination efficiency of up to 99%. Structurally, the case uses flame-retardant ABS material and meets UL 94-V0. The terminals are in I2 threaded lead alloy form and can be fitted with M6 bolts; the terminal torque requirement is 51.7±10.3 Kgf∙cm, equivalent to 44.9±9.0 Lbf∙in or 5.1±1.0 N∙m. Overall dimensions are: length 511.6±2.5 mm, width 110.0±1.5 mm, height 255.5±2.5 mm; weight is approximately 38.30 kg, equivalent to 84.41 lb. Electrical specifications: nominal voltage is 12 Vdc, nominal capacity is 100 Ah, tested at 1.80 VPC @25°C, 10-hour rate. If discharge conditions are changed, capacity data are as follows: at 8-hour rate, 1.75 VPC @25°C, it can deliver 100 Ah; at 20-hour rate, 1.75 VPC @25°C, 107 Ah; at 8-hour rate, 1.80 VPC @25°C, 96.8 Ah. Maximum charge current is 30 A, maximum discharge current is 800 A, short-circuit current is 2216 A, and internal resistance is 3.70 mΩ. Charging management parameters: at 25°C, float charge voltage is 13.5 to 13.8 Vdc/cell, and equalizing charge voltage is 14.4 to 15.0 Vdc/cell. Temperature conditions: nominal temperature 25°C; discharge can be between -15°C and 50°C; charging and storage can be between -15°C and 40°C. Self-discharge after 90 days is less than 10%. At 25°C, storage can last up to 6 months, and the battery must be fully charged before use; if storage temperature is above 25°C, recharging is required sooner. In terms of design life, it can reach 12 years under float charge at 25°C and meets the Eurobat long life standard (greater than 12 years at 20°C). It is manufactured according to IEC 60896-21/22:2004 and is also recognized to UL1989 (MH14533).