MSJ-500 csb battery 2V500Ah Suitable for DC backup power for communication base stations, Backup power deployed at the central office of fiber access networks, DC power for microwave relay stations
CSB MSJ-500 is used for telecommunications float standby power supplies. It is a 2V VRLA-AGM valve-regulated sealed lead-acid battery. The nominal capacity is 500Ah, tested at 10-hour rate, 1.80VPC, 25°C; the case uses flame-retardant ABS, the terminals use copper alloy, and the float design life is up to 20 years.
Taobao store
WeChat procurement
Product Features
- Valve-regulated lead-acid (VRLA) battery
- Maintenance-free; with absorbent glass mat (AGM) technology, gas recombination efficiency up to 99%
- Constructed with a pure lead structure and proprietary elements
- Specifically developed for high-capacity float standby power requirements
- Manufacturing process complies with IEC 60896-21/22:2004 and has obtained UL1989 recognition (MH14533)
Application Scenarios
- DC backup power for communication base stations
- Backup power deployed at the central office of fiber access networks
- DC power for microwave relay stations
- 48V DC system for telecom equipment rooms
- Backup power for broadband access equipment
- Backup power for mobile communications core networks
Product parameters
- Model:MSJ-500
- Voltage:2 Vdc
- Nominal Capacity:500 Ah @10hr-rate
- Ah Capacity:506.40 (8-Hr 1.75 VPC @ 25°C)
- Ah Capacity:524.00 (20-Hr 1.75 VPC @ 25°C)
- Ah Capacity:493.60 (8-Hr 1.80 VPC @ 25°C)
- Max. Charge Current:150.00 A
- Max. Discharge Current:3000 A
- Short Circuit Current:9953 A
- Internal Resistance:0.28 mΩ
- Terminal Type:I4 thread copper alloy terminal to accept M8 bolt
- Terminal Torque:126±25 Kgf·cm / 109±22 Lbf·in / 12.3±2.5 N·m
- Container Material:Flame-retardant ABS (UL 94-V0)
- Weight:36.50 / 80.45 kg / lb.
- Width (W):171.0±2.0 / 6.73±0.08 mm / in
- Height (H):339.0±2.5 / 13.15±0.10 mm / in
- Depth (D):241.0±2.5 / 9.49±0.10 mm / in
- Design Life:Up to 20 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
- Float Charging Voltage:2.21 ~ 2.25 Vdc/battery
- Equalizing Charging Voltage:2.35 Vdc/battery
- Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C
Product details
The official application focus of the CSB MSJ-500 is the telecommunications field, and it is classified under the MSJ series. This series is part of a VRLA 2V high-capacity telecommunications battery product line aimed at extending service life; under standby float conditions, the design life can reach 20 years. Its type is a 2V VRLA-AGM valve-regulated sealed lead-acid battery. Internally, it uses valve-regulated sealed lead-acid construction and AGM (Absorbent Glass Mat) technology, with gas recombination efficiency of up to 99%. It is a maintenance-free design and uses pure lead material and proprietary elements.
Tested at 1.80VPC, 25°C, 10-hour rate, the nominal capacity of the MSJ-500 is 500Ah. The other rate capacities are as follows: when discharged at 8-hour rate, 1.75VPC, 25°C, it can deliver 506.40Ah; at 20-hour rate, 1.75VPC, 25°C, it is 524.00Ah; at 8-hour rate, 1.80VPC, 25°C, it is 493.60Ah. The charge current does not exceed 150.00A, and the discharge current does not exceed 3000A; short-circuit current is 9953A, and internal resistance is 0.28mΩ.
For voltage and temperature settings, at 25°C the float voltage range is 2.21 to 2.25Vdc/battery, and the equalization voltage is 2.35Vdc/battery. The nominal operating temperature is 25°C; allowable discharge temperature is -15°C to 50°C; allowable charge and storage temperature is -15°C to 40°C. Regarding self-discharge, it is below 10% after 90 days at 25°C, and can be stored for up to 6 months; it should be fully charged before being put into service. If the storage temperature exceeds 25°C, supplementary charging is required in advance.
In terms of structural design, the MSJ-500 uses copper alloy I4 threaded terminals and is compatible with M8 bolts. Terminal tightening torque is 126±25 Kgf·cm, 109±22 Lbf·in, or 12.3±2.5 N·m. The case material is flame-retardant ABS, meeting UL 94-V0. Weight is 36.50kg (80.45 lb); width is 171.0±2.0mm, height is 339.0±2.5mm, and depth is 241.0±2.5mm. The product is manufactured in accordance with IEC 60896-21/22:2004 and is UL1989 recognized (MH14533).
The MSJ-500 can be used in high-capacity float standby backup power applications in the telecommunications field. Under 25°C float standby conditions, the design life is 20 years; according to the Eurobat standard, it exceeds 12 years at 20°C, reaching the Very Long Life level. With maintenance-free AGM technology and valve-regulated sealed construction, maintenance workload in float standby applications is reduced, making it suitable for telecommunications facilities that require high backup power reliability and long-term operation.